Remington hairsetter Styling Iron User Manual


 
98
Maintenance and Storage
Operating Instructions
1.This appliance is designed to work on
ordinary household current only (120
volts, 60 cycles AC). It is not intended for
commercial use.
2. Place the unit on a hard,flat, heat
resistant surface.
3. Open lid and plug cord into outlet.
Please note that damage to the unit
could occur if heated with the lid
closed. When unit is heated, follow
instructions shown for use. When
finished applying rollers in hair unplug
unit and allow to cool before closing lid
or storing away.
4. This appliance has a polarized plug (one
blade is wider than the other). As a
safety feature, this plug will fit in a
polarized outlet only one way. If
the plug does not fully fit in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install a
polarized outlet. Never try to defeat this
safety feature.
5. IMPORTANT OPEN LID WHEN IN USE.
Maintenance Instructions
1. Clean unit with damp cloth only. No other
maintenance is required.
2. Rollers may be cleaned with a damp
cloth and mild detergent or soap.
3. Store appliance and cord where they
will not be damaged.
4. Do not wrap cord around appliance.
5. Do not attempt to repair the appliance
yourself.
Storage
When not in use, unplug the unit. Allow it
to cool, and store it out of reach of children
in a safe, dry location.
Never wrap the cord around the
appliance this will cause the cord to
wear prematurely and break, thus voiding
warranty. Handle cord carefully for long life,
and avoid jerking, twisting or straining it,
especially at plug connections.
28113_KF-20i_IB 6/28/05 8:12 AM Page 8