Filter
Top Products
2 . Should the ALCI safety device trip (i.e., reset
button pop out) during use, press the reset
button. Should the dryer fail to reset, re t u rn
the dryer to Remington Customer Service for
examination and repair or replacement. Never
operate this appliance if it has been dropped
in water; re t u r n it to Remington Customer
S e r vice forexamination and repair or re p l a c e -
m e n t .
3 . The dryer is designed to work on ord i n a ry
household current only, 125 volts A.C., 60 Hz.
It is not intended for commercial use.
4 . This appliance is equipped with an automatic
t h e r mal limiter which will cycle off when over
heated and come back on when cooled
down.
If the unit cycles off, unplug the cord for sev-
eral minutes before re s t a rt i n g .
5 . This appliance has a polarized plug (one
blade is wider than the other). As a safety fea-
t u re, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt
to defeat this safety feature .
1 . This hair dryer is provided with an
appliance leakage circuit interrupter
(ALCI) safety device built into the plug.
This device is designed to make the
unit inoperable under some abnormal
conditions, such as accidental immer
sion in water. The ALCI safety device
is equipped with a test button so that
its operation can be checked. This unit
should be tested before each use to
c o n f i rm that the safety device is oper
a t i o n a l .
TO TEST:
After plugging in your hair dry e r :
A . P r ess the reset button on the ALCI
d e v i c e .
B . P r ess the test button. The reset button
will pop out. This verifies that the safe-
ty device is operating pro p e r l y.
C . P ress the reset button to reactivate
your ALCI safety device.
D . Your hair dryer is now ready for use.
N o t e : This unit may automatically trip
when unplugged. If so, unit must be
reset after it is plugged in. After following
the above testing pro c e d u r e, should the
indicator device not function pro p e r l y,
re t u rn the dryer to Remington Customer
S e rvice for examination and repair or
replacement.