Filter
Top Products
Cleaning and Maintenance
Clean your trimmer after each use
■ Turn the trimmer off.
■ Remove the adjustable trimmer comb
and cutter assembly or shaver attach-
ment.
■ Shake or blow out any accumulated
hairs, alternatively you may also rinse
it under running water.
Cleaning cautions
■ Only the adjustable trimmer comb and
cutter assembly may be removed from
the trimmer for cleaning.
■ Cleaning should be done with a soft
brush, such as the brush supplied with
the unit.
■ Only use the light-grade oil supplied
or a suitable alternative like sewing
machine oil. These oils will not evapo-
rate or slow down the blades.
■ Do not use harsh or corrosive cleaners
on the units or their cutters.
■ Do not apply pressure or hard objects
to cutters.
■ Do not disassemble cutter assembly.
Storage
■ Always store this appliance and cord in
a moisture-free area. Do not store it in
temperatures exceeding 140ºF (60º).
■ Do not wrap the cord of the charging
adapter around the appliance.
Important Safety Instructions
When using your body hair timmer, basic
precautions should always be observed,
including the following.
Warning
To reduce the risk of burns, electrocu-
tion, fire or injury to persons:
■ This appliance is for household use
only.
■ Use this trimmer only for its intended
use as described in this manual. Do
not use attachments not recommended
by the manufacturer.
■ Close supervision is necessary when
this appliance is being used by, on
or near children or invalids.
■ Always attach the plug to the appliance,
then to the outlet. To disconnect, turn
all controls OFF, then remove plug form
outlet. Detach removable power cords
from applainces for storage. Do not
plug or unplug this applaince with wet
hands.
■ An appliance should never be left
unattended when it is plugged in,
except when charging a rechargable
appliance.
■ Keep the cord away from heated
surfaces.
■ Never drop or insert any object into any
opening.
98
Clean Your Groomer
Regularly
Clean your groomer regularly to ensure your
unit’s operating life is not prematurely
shortened.
Cleaning attachments with water
■
Remove attachments.
■ Rinse attachments
under warm running
water. Do NOT use hot
water, which may
cause damage to
components.
■ You can use a hair dryer on a cool or
medium heat setting to help dry off the
attachments, if desired.
! Do not use harsh or corrosive cleaners
on the unit or its cutters.
! Do not apply pressure or hard objects
to cutters.
Cleaning the MiniScreen shaver
! Do NOT rinse or oil MiniScreen shaver
attachment. The unit is permanently
lubricated.
■ Press buttons at the
ends of the screen
head.
■
Remove head and
shake out the clippings
■ Blow off cutter assembly.
■ Replace head,making sure it snaps
in place.
Cleaning with brush
Thoroughly brush and blow out hair clip-
pings from cutter, bottom of attachments,
and top of power handle.
Troubleshooting
? If the cutters do not move
The cutting unit may be dirty and clogged.
Clean and lubricate the unit as described
above.
? If the groomer doesn’t work when
turned on
I
t may simply need charging. Follow the
instructions for charging on page 6.
? If the groomer does not hold a charge
Fully discharge the BHT-2000 by running it
until it stops.Then follow the recharging
instructions on page 6. If the time between
recharging cycles does not increase, the
battery may need replacing.
CS27555_BHT2000_IB 8/31/05 5:14 PM Page 8