Filter
Top Products
TAKING A MEASUREMENT
14
1. Press the ON/OFF button
All display symbols appear on the screen.
NOTE: When the monitor completes the necessary preparations
before measurement, the Heart Symbol ( ) appears
next to the zero. Wait for the Heart Symbol ( )
before taking a measurement.
2. Begin inflating the cuff by rapidly squeezing the inflation bulb until
you have reached approximately 30-40 mmHg higher than your
normal systolic reading. If your normal systolic blood pressure is
unknown, inflate the cuff to 180 mmHg.
3. When the desired pressure has been achieved, release the
inflation bulb.
NOTE: Do not inflate the arm cuff more than necessary. The current
time continues to be displayed while the cuff is being inflated.
412CRELN2 IM.tif 1/23/06 9:23 AM Page 14