Razor 15130658 Mobility Scooter User Manual


 
Remove contents from box. Remove the plastic separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the Pocket Mod is 95 percent assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 15 minutes for assembly.
Allow up to 18 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR POCKET MOD.
The Pocket Mod has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
Required Tools
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or call toll-free
at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
3mm (Daisy only),
5mm and 6mm key wrenches
(Included)
2.5mm key wrench
(Not included)
Bicycle-style tire pump
for Schrader valve tires,
with pressure gauge
(Not Included)
Storage Compartment
Under Seat
Chain Guard
Kick Stand
Throttle
Brake Lever
On/O
Switch
Charger Port
14mm (Daisy only)
and15mm wrenches
(Included)
8mm and 10mm wrenches
(Not Included)
Spoke tightener
(Included)
Charger
Charger
Plug
Charger
Port
Phillips screwdriver
(Not Included)