Filter
Top Products
28 www.pridemobility.com Legend Classic XL-8
VII. COMFORT ADJUSTMENTS
COMFORT ADJUSTMENTS
After becoming familiar with your scooter’s operation, you may find the need to make some adjustments to
increase your comfort.
WARNING! Remove the key from the key switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat while the scooter is in motion.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the scooter must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the
nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local
hardware stores or through your authorised Pride Dealer.
TILLER
ADJUSTMENT
LEVER
SEAT LOCK LEVER
SEAT SLIDING LEVER
Figure 13. Tiller Adjustment
Figure 14. Seat Adjustment
Tiller Angle Adjustment
Your scooter is equipped with a pivoting tiller that allows
adjustment to several positions from the scooter deck to the
farthest forward stop.
1. Lift the tiller adjustment lever. See figure 13.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever to secure the tiller in
position.
Seat Rotation
The seat lock lever will lock the seat into several positions.
1. Push forward on the seat lock lever to unlock the seat.
See figure 14.
2. Rotate the seat to the desired position.
3. Pull back firmly on the seat lock lever to lock the seat
securely in place.
Front-to-Back Seat Adjustment
You can reposition the scooter’s seat forward or rearward to
adjust the distance between the seat and the tiller.
1. Move the seat sliding lever outward. See figure 14.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.