Pride Mobility SC170HGRN Mobility Aid User Manual


 
24
Victory
TILLER ANGLE ADJUSTMENT
You can adjust the tiller to many positions. The tiller adjustment lever locks the tiller in place. It has a spring-loaded
mechanism that enables you to rotate it and change its position.
1. Turn the tiller adjustment lever counterclockwise until it is loose. If the tiller adjustment lever comes in contact
with the tiller basket, pull it outward, turn it clockwise, and release it. Continue to loosen until the tiller is able
to move. See figures 9A and 9B.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment lever clockwise until it is tight. If the tiller adjustment lever comes in contact with the
tiller basket, pull it outward, turn it counterclockwise, and release it. Continue to turn the lever until it is tight.
The tiller may be lowered to the center of the floorboard and locked in place for storage. See IX. Disassem-
bly and Assembly.
VIII. COMFORT ADJUSTMENTS
FIGURE 9A. ADJUSTING THE TILLER ANGLE
TILLER ADJUSTMENT
LEVER
TILLER RELEASE
BUTTON
TILLER BOOT
FIGURE 9B. REPOSITION TILLER ADJUSTMENT LEVER
(TILLER BOOT REMOVED FOR CLARITY)
PULL OUT TO REPOSITION
TILLER
RELEASE
BUTTON
FIGURE 10. SEAT HEIGHT ADJUSTMENT
LOWER SEAT
POST
UPPER SEAT POST
BALL DETENT PIN
LOCATING HOLES
SEAT PEDESTAL
WARNING! Remove the key before adjusting the tiller. Do not attempt to adjust the tiller
while the scooter is in motion.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different
heights. See figure 10.
1. Remove the seat from your Victory. See IX. Dis-
assembly and Assembly.
2. Use the attached ring to pull and remove the ball
detent pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
match up the holes in the upper seat post and the
lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.