Filter
Top Products
30
Boxter
Your Boxster requires a minimal amount of care and maintenance. If you do not feel confident of your ability to perform
the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride provider.
The following areas require periodic inspection an or care and maintenance.
XI. CARE AND MAINTENANCE
TIRE PRESSURE:
We recommend that the tire pressure be maintained at 30
psi. For optimum PMV performance, do not exceed that
pressure; overinflating a tire can cause it to explode.
TIRE CONDITION AND TREAD WEAR:
Regularly inspect your Boxsters tires for signs of wear.
Using a rubber conditioner on your Boxsters tires helps to
preserve them.
Do not put rubber conditioner on tread area of tires. The
tires may become dangerously slippery.
REMOVABLE FLOORMAT:
Your Boxsters carpet floormat is held on with Velcro fas-
teners. It can be removed, cleaned, and reinstalled as nec-
essary.
EXTERIOR SURFACES:
Bumpers and trim also benefit from an occasional applica-
tion of rubber or vinyl conditioner.
Do not use a rubber or vinyl conditioner on the Boxsters
vinyl seat; the seat may become dangerously slippery.
BATTERY TERMINAL CONNECTIONS:
n Make certain that the terminal connections remain
tight and uncorroded.
n The batteries must sit flat in the battery wells.
n The battery terminals should face the rear of the
Boxster.
WIRING HARNESSES:
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including
the charger power cord, for wear or damage.
n Repair or replace any damaged connector, con
nection, or insulation that you find before using
your Boxster again.
ABS PLASTIC SHROUDS:
The front console shroud and the rear shroud are formed
from durable ABS plastic and coated with an advanced
formula urethane paint. A light application of car wax helps
the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRAN-
SAXLE ASSEMBLY:
These items are all prelubricated, sealed, and require no
subsequent lubrication.
CONSOLE, CHARGER, AND ELECTRONIC
CONTROLLER MODULE:
Keep these areas free of moisture. If any of these items do
become exposed to moisture, let them dry thoroughly be-
fore operating your Boxster again.
STORAGE:
See VI. Batteries and Charging .