Filter
Top Products
Jazzy 1170 XL Plus Series www.pridemobility.com 23
V. COMFORT ADJUSTMENTS
Armrest Angle Adjustment
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 12.
2. Loosen the jam nut.
3. Turn the adjusting screw to raise or lower the front of
the armrest.
4. Tighten the jam nut to lock the adjusting screw
into place.
Controller Position
You can move the controller in toward or out away from
the armrest, or change the position of the controller for ei-
ther left-hand or right-hand use. See figure 13.
To extend the controller:
1. Flip up the armrest so it is perpendicular to the floor.
2. Loosen the setscrew on the controller bracket. See
figure 13.
3. Slide the controller into or out of the armrest to the
desired position.
To change the controller position:
1. Turn off power to the controller.
2. Disconnect the controller from the power base.
3. Cut the wire tie(s) securing the controller cable to the
armrest.
4. Flip up the armrest so it is perpendicular to the floor.
5. Loosen the setscrew on the controller bracket. See
figure 13.
6. Slide the controller out of the armrest.
7. Loosen the setscrew in the other armrest.
8. Place the controller in the other armrest.
9. Tighten the setscrew to secure the controller.
10. Use a wire tie to secure the controller cable to the
armrest.
11. Plug the controller into the power base. See figure 6.
SETSCREW
Figure 13. Underside of Armrest
CONTROLLER BRACKET