Filter
Top Products
Jazzy 114314
IV. COMFORT ADJUSTMENTS
Figure 11. Footrest Adjustment
FOOTREST HEIGHT ADJUSTMENT
FOOTREST DEPTH ADJUSTMENT
(BALL DETENT PIN SHOWN)
FOOTREST ANGLE ADJUSTMENT
(SETSCREW LOCATED UNDERNEATH
FOOTREST)
FOOTREST HEIGHT
The footrest height is easily adjusted to eight different heights. See figure 11.
To raise or lower the footrest:
1. Remove the seat and the body shroud. See V. Disassembly.
2. Remove the hex bolt and Nylock nut from the footrest.
3. Raise or lower the footrest to the desired height.
4. Reinstall the hex bolt and nut into the footrest.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 3/16-in. hex key. See figure 11.
To adjust the footrest angle:
1. Turn the setscrew clockwise to raise the front of the footrest.
2. Turn the setscrew counterclockwise to lower the front of the footrest.
FOOTREST DEPTH
The Jazzy 1143 uses a ball detent pin to fasten it to the power base. For your convenience, Pride also supplies a
hex head bolt and Nylock nut. You can use this bolt and nut instead of the ball detent pin for a more permanent fit.
To adjust the footrest depth:
1. Remove the ball detent pin from the footrest bracket.
2. Move the footrest in or out to the desired depth.
3. Reinstall the ball detent pin or the hex head bolt and nut (tighten with two 7/16-in. wrenches).