Pride Mobility J6 2SP Wheelchair User Manual


 
J6 Series www.pridemobility.com 21
INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments.
IV. ASSEMBLY
ARMREST ANGLE ADJUSTMENT
Figure 10. J6 Assembly View
CONTROLLER POSITION
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
SEAT INSTALLATION
SEAT HEIGHT ADJUSTMENT
FOOT PLATFORM ADJUSTMENT