Filter
Top Products
22
www.pridemobility.com Elite Traveller Plus/Plus HD
Follow these easy steps to charge your batteries safely:
NOTE: The battery pack can be charged on or off the Travel Scooter.
1. Position your Travel Scooter or battery pack close to a standard electrical outlet. See figure 14.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the drive (rearward) position.
4. Plug the 3-pin connector into the charger port on your Travel Scooter, then the power cord into the electrical
outlet. We recommend that you charge the batteries for 8 to 14 hours.
NOTE: The LED lights on the charger indicate different charger conditions at various times. Refer to
the operating instructions supplied with the charger for a complete explanation of these indicators.
5. When the batteries are fully charged, unplug the charger power cord from the electrical outlet and then from the
charger port.
NOTE: There is a charger inhibit function on your Travel Scooter. The Travel Scooter will not run and
the battery condition meter will not operate while the batteries are charging.
I V. BATTERIES AND CHARGING
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your Travel Scooter’s battery voltage is low, the charger works harder, sending more electrical current to
the batteries to bring up their charge. As the batteries approach a full charge, the charger sends less and less
electrical current. When the batteries are fully charged, the current sent from the charger is at nearly zero
amperage. Therefore, when the charger is plugged in, it maintains the charge on your Travel Scooter’s batteries,
but does not overcharge them. We do not recommend that you charge your Travel Scooter’s batteries for more
than 24 consecutive hours.
What if my Travel Scooter’s batteries will not charge?
! Ensure that the fuse on the battery pack is in working condition.
! Ensure both ends of the charger power cord are inserted fully.
Figure 14. Charging The Batteries (Battery Pack Removed)