Filter
Top Products
10 Basic Operation Instructions
Specialty Seat Kit www.quantumrehab.com Rev A 02-19-03
Required Tools for Bottom Height Adjustment:
n Phillips head screwdriver
n 3/32-in. hex key
n 5/32-in. hex key
To adjust the bottom height:
1. Use the Phillips head screwdriver to remove the four (4) 3/8-in. pan head
screws. See figure 6.
2. Use the 3/32-in. hex key to remove the two (2) 5/16-in. flat head screws.
Remove the plastic clothing guard.
3. Use the 5/32-in. hex key to remove the two (2) 1/2-in. flat head screws
from the detent bar.
4. Slide the armrest up or down.
5. Line up the holes in the armrest.
6. Reinstall the two (2) 1/2-in. flat head screws.
7. Reinstall the plastic clothing guard.
Figure 6. Quick Height Adjustable Drop-in Armrest Bottom Height
Adjustment
Clothing Guard
Detent Bar
Armest Lock
1/2-in. Flat Head Screws
5/16-in. Flat Head Screws
Armrest Lock Lever
3/8-in. Pan Head
Screws
3/8-in. Pan Head Screws