Filter
Top Products
18 www.quantumrehab.com Quantum 1121
III. YOUR POWER CHAIR
To operate the dual manual freewheel levers:
1. Pull up the manual freewheel lever on each motor for freewheel mode (drive disengaged). See figure 8.
2. Push down the manual freewheel lever on each motor for drive mode (drive engaged). See figure 9.
NOTE: If a lever is difficult to move in either direction, rock your power chair back and forth slightly. The
lever should then move to the desired position.
Figure 8. Freewheel Mode (Drive Disengaged)
Figure 9. Drive Mode (Drive Engaged)
Manual Freewheel Lever
For your convenience, your power chair is equipped with a manual freewheel system. This system consists of one or more
freewheel levers which enable you to disengage the drive motors and maneuver the chair manually.
WARNING! Do not use your power chair while the drive motors are disengaged unless you are in
the presence of an attendant! Do not disengage the drive motors when your power chair is on an
incline. The chair could roll down on its own, causing injury!
WARNING! It is important to remember that when your power chair is in freewheel mode, the
braking system is disengaged.