Filter
Top Products
2-4
Chapter 2: Getting Acquainted
Integra
™
Platform Scale 9K0U Operator Guide SV61955 Rev. A
Entering the
Supervisor
Password
You can access these options by pressing the Setup key and
selecting Supervisor Setup. Refer to the chart below, which
includes the options under Supervisor Setup.
Follow the steps below to access supervisor setup options:
1. Press the Setup key.
2. Select Supervisor Setup. The Enter Password prompt
displays.
3. Enter the supervisor password — M G R — on the alpha
keys; press Enter. The options Exit, Configure Scale, and
BMC Intra ZIP display. See the chart on the next page for
definitions of these functions. Pressing Exit returns you to
the User Setup screen.
4. Select the desired options and respond to the prompts.
5. When finished, select Exit until you exit the setup menus.
6. Select Save or Cancel to save or cancel your changes.
The scale resets and returns to the ready screen.
Shaded options appear only if
turned ON under Configure Scale.
* Accessible by SERREP
password (not recom-
mended).
Configure Scale
-Exit
-Install Scale
-Off Other Language
-Off Inscription
-Off Accounting
-Off Vibration Filter
-Off Discount/Surcharge
-Off Rate Shopping
User Setup
-Exit
-On Autoclear Class
-On Clear Zone New Class
-Off Auto Weigh Hold
-Supervisor Setup
-Service Setup*
Supervisor Setup
-Exit
-Configure Scale
-BMC Intra ZIP
-Program Rate Shop
-Discount/Surcharge
-Program Carrier