Filter
Top Products
C
2 Press the Razor Head Release Button and
remove Razor Head Assembly from the
razor unit.
C
3 Brush the inside of the razor housing and
Razor Head Assembly.
4 Turn Razor Head Assembly over so that
underside is exposed.
C
5 Turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
C
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C
9 Only brush the cutter in an upward
motion. Use the short bristled side of the
brush.
C
10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
ENGLISH16
Downloaded from www.Manualslib.com manuals search engine