Filter
Top Products
7 Clean the inside of the shaving guard.
8 After cleaning, place the shaving guard back
into the shaving head holder. Make sure the
two wings t exactly into the recesses of the
shaving head holder.
9 Place the cutter back into the shaving guard
with the cutter legs pointing downwards.
10 Place the retaining ring back onto the shaving
head holder (1). To reattach the retaining ring,
turn it against the direction of the arrows
indicated in and on the retaining ring (2).
Make sure the retaining ring is xed properly. The four
wings of the retaining ring have to be located exactly
under the recesses of the shaving head holder.
11 Reattach the shaving unit to the shaving
attachment.
If the shaving unit does not close smoothly, check if you
have positioned the shaving heads properly and if the
retaining rings are xed properly.
ENGLISH
21