Filter
Top Products
To Define Beard Line
1. Hold Trimmer vertically
with front of Trimmer fac-
ing you (Fig. 8).
2. Start with trimmed edge
of beard and with down-
ward motions trim area
directly under the beard
line.
To Thin and Taper Beard
1. Use a small comb to hold
hairs in place while trim-
ming.
2. Hold Trimmer with front
of Trimmer facing away
from you (Fig. 7).
3. Trim hair ends using an
upward motion.
4. Turn Trimmer OFF.
To Trim Moustache with
Trimmer Guard Attachment
• Be certain Trimmer Guard
Attachment is on to pre-
vent trimming off too
many hairs.
1. Comb hairs outward so
they are at their maximum
height and in the same
direction.
2. Set One Stroke Comb
Adjuster to desired setting
(Fig. 4).
Trimmer Guard Attachment (continued)
5. Turn Trimmer OFF.
To Trim Sideburns
1. Comb sideburns following
the direction of your hair
growth.
2. Be certain Trimmer Guard
Attachment is ON.
3. Hold Trimmer vertically
with front of Trimmer fac-
ing you.
4. Trim sideburns using a
downward motion.
5. Turn Trimmer OFF.
To Achieve The
“Stubble” Look
• The Trimmer Guard
Attachment is unique
because it has a small slot
between the two rows of
teeth enabling you to trim
hairs to only .06
in./1.5mm in length.
• Hold Trimmer vertically
with front of Trimmer fac-
ing you.
• Trim hairs using a down-
ward motion following the
direction of your hair
growth or you may trim
against your hair growth—
whichever is preferred.
NOTE: Since all hairs do
not grow in the same
direction, you may want
to try different trimming
positions (i.e. upwards,
downwards or across).
Practice is best for opti-
mum results.
To Trim Moustache without
Trimmer Guard Attachment
1. Remove Trimmer Guard
Attachment (Fig. 10).
2. Place a finger on upper lip
to lift hair up, away from
skin.
3. Trim hairs using an
upward motion.
4. After achieving desired
length, use a downward
motion to blend mous-
tache hairs (Fig. 8).
NOTE: Use a slow and
gentle pressure. Too
much pressure may trim
more hair than desired.