Philips QC5570 Hair Clippers User Manual


 
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the appliance and
insert the adapter into the wall socket.
, The charging light starts to ash white to
indicate that the appliance is charging.
, When the battery is fully charged, the charging
light lights up white continuously.
, After approx. 30 minutes the charging light goes
out to save energy.
Optimising the lifetime of the rechargeable
battery
Discharge the rechargeable battery completely twice
a year by letting the motor run until it stops. Then
fully recharge the battery.
Corded clipping
1 Switch off the appliance.
2 Connect the appliance to the mains and wait a
few seconds before you switch it on.
Note: If the battery is completely empty, wait a few
minutes before you switch on the appliance.
Using the appliance
Make sure your hair is clean and dry. Do not use the
appliance on freshly washed hair.
ENGLISH 9