Important
◗ Make sure the socket is live when you
recharge the toothbrush.The electricity
supply to sockets in mirror cabinets over
washbasins or shaver sockets in bathrooms
may be cut off when the light is turned off.
◗ Charge the toothbrush for at least 16 hours
before you use it for the first time.
◗ The cord of the appliance cannot be replaced.
If the cord is damaged, you should have the
appliance replaced by Philips or a service
centre authorised by Philips in order to avoid
hazardous situations.
◗ The mains plug of the appliance meets the
latest European standards.The plug is safe,
although the standard UK shaver socket holes
may be slightly too wide for the pins of the
plug. Make sure a proper connection is made.
◗ When you use the water jet for the first time
or when you have not used it for a long time,
it is necessary to set the volume control to its
maximum position to make the water start
flowing to the jet tip. If the water doesn't flow
out after 10 seconds, put the jet tip in your
mouth and suck it for a few seconds.
◗ If an "NiCd" indication is present on your
appliance, the built-in rechargeable battery
contains substances that may pollute the
enviroment.When you discard the toothbrush
in due course, remove the battery and
dispose of it in an environmentally safe way.
ENGLISH4