Filter
Top Products
C
5 Remove the Precision Zoom Lock` by
pulling it in the direction of the cutting
unit.
C
6 Remove the cover.
C
7 Pull out the printed circuit board.
C
8 Insert a screwdriver into the small slot in
the printed circuit board marked with an
arrow. Push the screwdriver down until
part of the printed circuit board breaks
off.
C
9 Open the plastic battery holder and take
out the rechargeable battery.
Dispose of the battery and the other
components in an environmentally safe way.
Do not connect the appliance to the mains again
after it has been opened!
ENGLISH 9
1
2