Philips HP 405/355 Electric Toothbrush User Manual


 
Philips rechargeable toothbrushes HP 405 and HP 355
Clean & Clear brush movement (fig. 4a)
The brush moves in two directions and at two speeds simultaneously:
Quick short stroke (4200 rpm) longitudinal scrubbing to dislodge the
plaque material;
Slow long stroke (120 rpm) rolling movement to move the dislodged
plaque away.
New “Soft Pressure Control” (fig. 4b)
Too much pressure may damage both gums and teeth, causes
unneccesary wear of the brush and also reduces the effectiveness of the
brushing operation.
The “Soft Pressure Control” system helps you to control the pressure
when brushing your teeth.
When pushed too hard against the teeth or gums, the brush will
automatically warn you by a sudden change in the position of its neck.
“Contour” brush profile (fig. 4c)
The ergonomic “Contour” bristle profile guarantees optimum cleaning.
The soft white bristles brush the gumline and reach deeply between the
teeth. The blue bristles especially clean the (chewing) surfaces.
5
Important
First charging: at least 12 hours.
The mains cord of this appliance cannot be replaced.
If the cord is damaged, the appliance should be discarded.
For optimum brushing efficiency and for hygiene: replace the
click-on brushes as soon as the hairs begin to stand out or at
least every three months.
It is advisable to use your electrical toothbrush twice a day for
at least two minutes.
The built-in rechargeable battery contains substances which
may pollute the environment.
When eventually discarding your appliance please remove the
built-in rechargeable battery (fig. 20-26) and dispose of it at an
officially assigned refuse site or otherwise according to
national regulations.
Please refer to section Protecting the environment.