Filter
Top Products
1 Connect the plug to a power supply socket.
2 Press and hold the
button ( ) until the display screen lights up.
» The default temperature setting 160°C is displayed (
).
3 Press the
or buttons ( ) to select your desired
temperature setting. Refer to the Hair Type table at the end of the
chapter.
» When the heating plates are heating up, the temperature digits
will blink.
» When the heating plates have reached the selected
temperature, the temperature digits stop blinking.
ThermoGuard
ThermoGuard prevents you from unintentional heat exposure above
200°C. When you increase the temperature above 200°C, the
temperature will increase only 5°C by each step.
4 The ion function is activated when the appliance is switched on,
which provides additional shine and reduces frizz.
» The ion indicator (
) is displayed.
» You may smell a special odor and hear a sizzling noise. It is
common because they are caused by the ion generator.
5 Slide the closing lock (
) downwards to unlock the appliance.
6 The keys are automatically locked if no button is pressed for 15
seconds to avoid unintentional switching.
Press
for 1 sec to unlock the appliance.
7 Comb your hair and then start by clipping your blow dried hair into
sections not wider than 5cm.
Note: For thicker hair, it is suggested to create more sections.
8 Place one section of hair in between the heating plates (
) and
SUHVVWKHKDQGOHVÀUPO\WRJHWKHU
9 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.