Filter
Top Products
» After 30 seconds, the appliance heats up.
» HP8310 only: The ion function activates when the appliance is
switched on. The function provides additional shine and reduces
frizz. When the function is on, a special odor may be smelt and a
sizzling noise may be heard, which is normal and caused by the
ions that are generated.
3 Slide the closing lock (
) to unlock the appliance.
4 Comb your hair and take a section that is not wider than 5cm for
straightening.
5 Place it between the straightening plates (
) and press the handles
together.
6 Slide the straightener down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
•
To create icks, turn the straightener half-circle inwards (or
outwards) when it reaches the hair ends. Hold the straightener in
that position for 2 to 3 seconds, and then release it.
7 After 20 seconds, repeat step 6 until you achieve the desired look.
8 To straighten the rest of your hair, repeat steps 4 to 7.
After use:
1 Switch off the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp cloth.
4 Lock the straightening plates (
).
5 Keep it in a safe and dry place, free of dust. You can also hang it with
the hanging loop (
).
3 Guarantee and service
If you need information e.g. about replacement of an attachment or if
you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.