Filter
Top Products
Only use the exfoliating head on your legs, not on your underarms or
bikini line.
1 Make sure the appliance is switched off.
2 Remove the skin cooler.
3 Remove the epilating head (fig. 12).
Grab the epilating head by the ribbed sections and move it in the
direction of the arrow indicated on the epilating head.
4 Place the exfoliating head on the appliance and move it against
the direction of the arrow indicated on the exfoliating head until
it snaps home (fig. 14).
The exfoliating head can only be fitted onto the appliance in one way.
5 Switch the appliance on.
Use speed I or II, depending on the required exfoliating intensity.We
recommend exfoliating each leg for 1-3 minutes.
- Use the exfoliating head once or twice a week to improve the
appearance of your skin.
- Don't use any cream, foam, gel or lotion just before or during
exfoliation.
- Don't use the exfoliating head immediately before or within two
days after epilation.
- For hygienic reasons, the exfoliating head should only be used by
one person.
- We advise you to exfoliate before going to bed at night, as this will
allow any skin irritation that may develop to diminish overnight.
- Apply a mild cream or body milk after exfoliating.
Cleaning and maintenance
Never rinse the adapter plug or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
ENGLISH 11