Filter
Top Products
1 Remove the hearing capsule from the customised sleeve (see
chapter ‘Cleaning’).
2 Remove the battery by placing your ngernail between the hearing
capsule and the round part of the battery. (Fig. 5)
3 Remove the sticker from the new battery.
Only use type 10 batteries (yellow sticker).
Do not remove the sticker before you are going to use the battery.
Replacing the battery with the battery insertion aid in the
storage box
1 Slide the lid of the storage box completely open and place the new
battery in the battery cavity. (Fig. 6)
2 Press the hearing capsule into the storage box over the battery.
(Fig. 7)
Make sure the pull tab is at the same side as the + side of the battery.
Replacing the battery with the loose battery insertion aid
1 Place the battery in the battery cavity of the battery insertion aid.
(Fig. 8)
2 Press the hearing capsule into the battery insertion aid. (Fig. 9)
Make sure the pull tab is at the same side as the + side of the battery.
Storage
Store the Microlux in the storage box provided.
Environment
Batteries contain substances that may pollute the environment. Do
not throw empty batteries away with the normal household waste,
but hand them in at an ofcial collection point. Always remove the
battery before discarding the Microlux and handing it in at an
ofcial collection point.
,
,
ENGLISH 11