Philips e9000 Electric Toothbrush User Manual


  Open as PDF
of 60
 
Features
Easy-start
This Sonicare model comes with the Easy-start feature activated, which
helps you get used to brushing with the Sonicare.
The brushing power gently increases to full power over the rst 14
brushings.
The Easy-start feature is active if you hear 2 beeps immediately after
you switch on the Sonicare. Once the Sonicare has reached optimal
brushing power (after the 14th brushing), you no longer hear the 2
beeps at the beginning of each brushing cycle.
Note: Each of the rst 14 brushings must be at least 1 minute long to move
properly through the Easy-start ramp-up cycle.
Note: While the Easy-start feature is activated, the Dual Speed feature
(Gentle and Max speed modes) does not function. To use the Dual Speed
feature immediately, deactivate the Easy-start feature.
Deactivating or activating the Easy-start feature
1 Attach the brush head to the handle.
2 Placethehandleintheplugged-incharger.
3 TodeactivatetheEasy-startfeature,pressandholdtheon/offbutton
for5seconds.Youhear1beeptoindicatethattheEasy-startfeature
has been deactivated.
4 ToactivatetheEasy-startfeature,pressandholdtheon/offbutton
for5seconds.Youhear2beepstoindicatethattheEasy-start
feature has been activated.
UseoftheEasy-startfeaturebeyondtheinitialramp-upperiodisnot
recommended and reduces the effectiveness of the Sonicare toothbrush
in removing plaque.
MakesuretheEasy-startfeatureisdeactivatedandthehandlefully
charged when the Sonicare is used in clinical trials.
Smartimer
This Sonicare model comes with the Smartimer feature, which
automatically sets the brushing time to the 2 minutes that dentists and
dental hygienists recommend.
After 2 minutes, the Smartimer automatically switches off the
toothbrush.
If you want to stop brushing briey during a 2-minute brushing cycle,
press the on/off button. When you press the on/off button again, the
Smartimer resumes the brushing cycle at the point where you stopped.
The Smartimer automatically resets to the beginning of a 2-minute
cycle if:
you stop brushing for 30 seconds or longer;
you put the handle in the charger.
-
-
-
-
-
-
-
-
-
ENGLISH8
 previous next