Philips Dlnzw Electric Shaver User Manual


 
C
Connect cord to razor.Connect charging
plug into any 120V to 240V AC outlet.Use
only the charging plug provided. The green
LED Light will light up to indicate razor is
(re)charging and will brink when fully
charged. You can shave immediately
(corded).
An adaptor plug may be necessary for charging
plug usage in some foreign countries.Use an
attachment plug adaptor of the proper
configuration for power outlet.The charging
plug will automatically convert to work on
100V to 240V AC Systems.
Do not charge razor in pouch.
First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours.When batteries are fully
charged,the green LED Light will blink.
Recharging
First time charging requires 4 hours. After
initial charge,recharging requires
approximately 1 hour.
Disconnect the charging plug from outlet.
Do not keep razor permanently plugged
into outlet.
Quick Charge
When batteries are totally depleted,recharging
the razor for approximately 6 minutes gives
enough energy for a 3 minute cordless shave.
2
1
2
1
5
ENGLISH
LED Battery Indicators
C
Low Battery Indicator
Light blinks red when razor needs recharging.
C
Full Charge Indicator
When batteries have been fully charged,green
LED light will blink.
C
Charging Indicator Light
Green LED Light will light up to indicate razor is
(re)charging.
Charging
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the charging plug
provided.This razor will not recharge while
being used corded.
4
ENGLISH
+
-
+
Downloaded from www.Manualslib.com manuals search engine