Philips BG2036 Electric Shaver User Manual


 
Caution
- Use, charge and store the appliance at a temperature between 5°C
and 35°C.
- Only use the adapter and the charging stand supplied to charge the
appliance.
- Never immerse the charging stand in water nor rinse it under the tap.
- If the appliance is subjected to a major change in temperature, pressure
or humidity, let the appliance acclimatise for 30 minutes before you use it.
- If the adapter or charging stand is damaged, always have it replaced
with one of the original type in order to avoid a hazard.
- Do not use the appliance if any of its parts is damaged or broken, as
this may cause injury.
- This appliance is only intended for shaving and trimming body parts
below the neckline. Do not use it to shave or trim facial or scalp hair.
Compliance with standards
- The appliance complies with the internationally approved IEC safety
regulations and can be safely used in the bath or shower.
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic elds.
Charging
Charging takes 1 hour (BG2038/BG2036) or 8 hours (BG2028/BG2026/
BG2025/BG2024) depending on the model. When the appliance is fully
charged, it has an operating time of up to 50 minutes.
When the battery status indicator ashes red, the battery is running low
(approx. 10 minutes of operating time left) and you need to recharge the
appliance.
1 Insert the small plug into the charging stand.
2 Put the appliance in the charging stand.
, The battery status indicator ashes green to indicate that the
appliance is charging.
Note: The battery status indicator of BG2028, BG2026, BG2025 and BG2024
looks different, but works in the same way.
ENGLISH 7