Filter
Top Products
4 Turn the lock anticlockwise (1) and remove the retaining frame (2).
5 Remove and clean one shaving head at a time. Each shaving head
consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
- Remove the cutter from the shaving guard and clean it with the brush.
- Clean the inside and outside of the shaving guard with the brush.
6 Put the shaving heads back into the shaving unit.
AT940/AT893/AT891/AT890: Make sure that the projections of the
shaving heads t exactly into the recesses.
7 Put the retaining frame back into the shaving unit and turn the lock
clockwise.
ENGLISH 11