Philips 9160XL Electric Shaver User Manual


 
Before First Use
Charge the razor before you start using it
(see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
Only use the power plug and/or charging
stand provided to charge the razor.
The charging plug transforms 100 – 240V AC
to less than 24V DC.
Charging
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the cord provided.
This razor will not recharge while being used
corded.
Do not charge razor in a pouch.
Recharge only when the bottom light on the
display lights up red.
Do not charge/recharge or use razor corded
until fully dried.
ENGLISH 13ENGLISH12
To replace clock battery
C 1 Turn clock module counterclockwise (1)
and remove from stand (2).
C 2 Remove battery cover and then use a flat-
bladed screwdriver to lift out the battery.
C 3 Replace battery with 1.5V button cell
watch battery, placing rounded side of
battery into battery compartment, flat side
(+) facing out. Replace battery cover.
C 4 Replace clock module into stand (1) and
turn clockwise to secure in place (2).
1
2
1
2