Philips 8846XL Electric Shaver User Manual


 
The charging plug transforms 100-240 volts to
a voltage lower than 24 volts.
Do not charge razor in pouch.
C
1 Connect cord to razor.Connect charging
plug into any 100V to 240V AC outlet.Use
only the charging plug provided.
The right green LED light will light up to indicate
razor is (re)charging and will blink when fully
charged.
An adaptor plug may be necessary for charging
plug usage in some foreign countries. Use an
attachment plug adaptor of the proper
configuration for the power outlet.
Your new razor will automatically convert to
work on 100V to 240V AC systems.
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours.
When batteries are fully charged, the right green
LED light will blink.
Recharging
1 First time charging requires 4 hours.After
initial charge, recharging requires
approximately 1 hour.
2 When razor is fully charged,disconnect
the charging plug from outlet.
Do not keep razor permanently plugged into
outlet.
ENGLISH 11
8845XL 8846XL.QXD 2/25/04 3:44 PM Page 11 (Black plate)