Philips 8240XL Electric Shaver User Manual


 
ENGLISH
LED Indicators
The meter provides the following information:
C
Charging Indicator
When you charge razor, the full light on
the display will light up.
C
Full Charge Indicator
When the batteries have been fully charged,
the top light blinks. When razor is unplugged
from outlet, the top light stops blinking.
C
Low Battery Indicator (model 8250XL,
8251XL only)
When the battery is running low (5 or less
shaving minutes left), the bottom light on the
display lights up. When you turn the razor OFF,
the bottom light will blink a few times.
Before First Use
◗ Charge the razor before you start using
it (see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
◗ Only use the power plug provided to charge
the razor.
The charging plug converts 100 – 240V AC to
less than 24V DC.
10
ENGLISH
Charging
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the charging plug
provided. This razor will not recharge while
being used corded.
Do not charge razor in a pouch.
For model 8250XL, 8251XL only, recharge
only when the bottom light on the display
lights up.
Do not charge/recharge or use razor corded
until fully dried.
C
1 Connect cord directly to razor and
connect the charging plug into any 100V to
240V AC outlet. Use only the charging plug
provided.
◗ Do not leave the razor continuously plugged
into outlet charging as it would reduce life
of batteries. Remove the plug from outlet as
soon as the razor is fully charged.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
11