Philips 8138XL Electric Shaver User Manual


 
ENGLISH10 ENGLISH 1110
LED Indicators
C Charging Indicator
When you charge razor, the charge light on
the display will light up green.
C Full Charge Indicator
When the batteries have been fully charged,
the top light blinks green.
Before First Use
Charge the razor before you start using it (see
‘Charging’). Make sure the razor is switched
off before you start charging it.
Important
Only use the power plug provided to charge
the razor.
The charging plug converts 100 – 240V AC to
less than 24V DC.
Charging
Battery performance is best if you recharge only
when the batteries are (almost) completely
empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the charging plug
provided.This razor will not recharge while
being used corded.
Do not charge razor in a pouch.
Do not charge/recharge or use razor corded
until fully dried.
C 1 Connect cord directly to razor.Connect
the charging plug into any 100V to 240V AC
outlet.Use only the charging plug provided.
An adaptor plug may be necessary for charging
plug usage in some foreign countries. Use an
attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
2 First time charging and recharging after
non-use for 1 month or more requires a
full 4 hours. A fully charged razor has a
cordless shaving time of up to 55 minutes.
When batteries are fully charged, the top light
blinks green.
Recharging
1 First time charging requires 4 hours. After
initial charge, recharging requires 1 hour.
2 When razor is fully charged,disconnect
the charging plug from outlet.
Do not keep razor permanently plugged into outlet.