Philips 8060X Electric Shaver User Manual


 
ENGLISH
3 Remove trimmer from the trimmer
storage compartment on the refill &
charge stand.
C
4 Fit the trimmer onto the razor (you will hear
a click). The trimmer is now ready for use.
5 Activate trimmer by pressing the on/off
button once.
Do Not Press Shaving Conditioner Button While
Using Trimmer.
To Use Trimmer:
1 Turn razor ON.
C
2 Hold trimmer to exact hairline desired.
Move trimmer downward with gentle
pressure.
3 Trim beard, moustache or sideburns using
the trimmer.
4 Turn razor OFF when finished.
5 Thoroughly clean the trimmer after using
(see ‘Cleaning’).
To Remove Trimmer:
1 Turn razor OFF.
24
ENGLISH
2 Take the trimmer off the razor by pulling
straight up away from the razor. Place the
trimmer back into the trimmer storage
compartment on the refill & charge stand.
C
3
Replace Razor Head Assembly back on
the razor and push down (you will hear a
click).
The Razor Head Assembly will only fit correctly
in one position on razor. Make sure to align the
2 shaving lotion dispensing holes on the Razor
Head Assembly with the 2 shaving lotion tubes on
the razor.
C
4
Put the Protective Razor Head Cap on the
razor.
C
5
You may store your razor in the refill &
charge stand. Unplug from the outlet when
refilling & charging is complete.
Travel Lock
If you are going to store the razor for a longer
time period or if you are going to travel, it is
possible to lock the razor. The travel lock prevents
the razor from being switched on by accident.
25