Filter
Top Products
ENGLISH
5 You can store the razor in the charging
stand.
6 Put Protective Razor Head Cap on razor
to protect heads.
Note: If lotion build-up has occurred, remove
Razor Head Assembly and soak for a few minutes
under hot water or a degreasing liquid (e.g.
alcohol). Be sure to thoroughly rinse Razor Head
Assembly under tap water before using razor.
Razor Head Assembly: Once A Month
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF.
C 2 Remove Razor Head Assembly from razor
by pulling Razor Head Assembly straight
up from razor.
C 3 Using your thumb and forefinger turn the
razor head clockwise and lift the comb off
of Razor Head Assembly.
4 Remove and clean one set of cutters and
combs at a time.
24
ENGLISH
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
5 Separate the cutter from the comb and
clean with a small brush or rinse clean
under hot water.
6 Replace the cutter back onto the Razor
Head Assembly making sure the blades are
pointing upwards.
C 7 Place the razor head comb back onto the
Razor Head Assembly.
Be sure to replace the comb back into the
original razor head before cleaning the next set.
C 8 Turn the razor head counterclockwise
until it locks into place.
9 Repeat the process for the other two sets
of cutters and combs.
C 10 Replace Razor Head Assembly back on
razor and push down (you will hear a
click).
The Razor Head Assembly will only fit correctly
in one position on razor. Make sure to align the
2 shaving lotion dispensing holes on the Razor
Head Assembly with the 2 shaving lotion tubes on
the razor.
25
6
0
1
6
6