Filter
Top Products
combs should be cleaned in a degreasing liquid
(e.g.Norelco Razor Cleaner,Model RC1776,or
alcohol) and lubricated with Norelco Razor
Lubricant,model AL80,or one drop of mineral
oil (in the center of the head).
Every Six Months:Trimmer
Turn razor OFF.
Push Trimmer Slide Switch up to pop up
Trimmer.
C
Clean Trimmer with the brush.
C
Lubricate the Trimmer teeth with Norelco
Razor Lubricant (model AL80) or with one
drop of mineral oil.
Close Trimmer by sliding Trimmer switch
down.
This r
azor has no other user-ser
viceable parts.
Any other service should be performed by an
Author
ized Norelco Service Location.
5
4
3
2
1
11
ENGLISH
Remove and clean one set of heads at a
time.
C
Separate the cutter from the comb and
rinse clean under hot water.
◗ Do not clean more than one cutter and comb
at a time,since they are all matching sets.If you
accidentally interchange the cutters and combs,
it could take several weeks before optimal
shaving performance is restored.
C
Replace the set back into the Head
Assembly in such a way that the sides with
the little holes point to the middle of the
shaving unit.
◗ Make sure that the two pointy edges of the
head fit exactly into the recesses.
Repeat the process for the other two sets
of cutters and combs.
Replace the frame.
C
Press down and turn wheel clockwise until
it locks into place.
Replace the Razor Head Assembly back on
razor.
◗ If the razor heads have been properly inserted,
a shiny circle is visible in the middle of the razor
head assembly.
Once A Month:Razor Heads
◗ For optimum performance,razor cutters and
10
9
8
7
6
5
4
10
ENGLISH
Downloaded from www.Manualslib.com manuals search engine