Filter
Top Products
11
1
Connect cord to razor. Connect charging plug into any
100V to 240V AC outlet.Use only the charging plug
provided.The green LED Light will light up to indicate razor
is (re)charging and will blink when fully charged.You can
shave immediately (corded).
An adaptor plug may be necessary for charging plug usage in
some foreign countries.Use an attachment plug adaptor of
the proper configuration for power outlet.The charging plug
will automatically convert to work on 100V to 240V AC
Systems.
Do not charge razor in pouch.
2 First time charging and recharging after non-use for
1 month or more requires a full 4 hours.
When batteries are fully charged, the green LED Light
will blink.
Recharging
1 First time charging requires 4 hours. After initial charge,
recharging requires approximately 1 hour.
2 Disconnect the charging plug from outlet.Do not keep
razor permanently plugged into outlet.
Quick Charge
When batteries are totally depleted, recharging the razor
for approximately 6 minutes gives enough energy for a
3 minute cordless shave.
PUT IT TO THE TEST & SHAVING TIPS
21 Day Trial and Conversion Process.It is a fact that
your skin and beard need time to adjust to a new
shaving system.
Use your new razor exclusively for 3 weeks to fully
enjoy the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to
adjust. Invest 3 weeks and you'll soon experience the full
joy of your new razor.
7845XL10_01 11/8/01 3:11 PM Page 11