Filter
Top Products
C
3 Slide the cartridge with the connector in
place into the razor. It only fits properly if
the white side of the connector is pointing
upwards.Close the cover.
4 Press the applicator button a few times
until the Nivea for Men shaving lotion or
gel appears in the small hole located on
razor head assembly.The razor is now
ready for use.
Replacing Cartridges
C
1 Press the release button and open the
back cover of razor.
2 Remove empty cartridge, pull out and save
the connector. DO NOT discard the
connector.
3 Rinse out cartridge compartment with
water before replacing cartridge. Air dry
thoroughly.
C
4 Insert connector into the plastic cap of
new cartridge until it clicks into position.
5 Follow steps 2-4 for “Inserting the First
Cartridge.”
Use only Norelco Cool Skin Nivea for
Men shaving lotion (HQ170) or gel
(HQ171) cartridges with this razor.
ENGLISH16
2
1
7775X DFURR 11/25/03 12:35 PM Page 16 (Black plate)