Filter
Top Products
Replacing Cartridges
C
1 Press the release button and open the
back cover of razor.
2 Remove empty cartridge, pull out and save
the connector. DO NOT discard the
connector.
3 Rinse out cartridge compartment with
water before replacing cartridge. Air dry
thoroughly.
C
4 Insert connector into the plastic cap of
new cartridge until it clicks into position.
5 Follow steps 2-4 for “Inserting the First
Cartridge.”
Use only Norelco Cool Skin Nivea for
Men shaving lotion (HQ170) or gel
(HQ171) cartridges with this razor.
Do not throw the connector away when you
replace an empty cartridge.You will need to use
the same connector for the other cartridges.
The Nivea for Men shaving lotion or gel
cartridges should be stored at a temperature
between 32ºF and 104ºF.
ENGLISH14
2
1
7735X DFU 11/19/03 4:29 PM Page 14 (Black plate)