Philips 7617X Electric Shaver User Manual


 
ENGLISH 11ENGLISH10
LED Charging Indicator
C LED Charging Indicator Light
The green Charging Indicator Light will light up
to indicate razor is (re)charging.
Before First Use
Charge the razor before you start using it
(see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
Only use the power plug provided to charge
the razor.
The charging plug converts 100 – 240V AC to
less than 24V DC.
Charging
Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging will reduce life of
batteries.
Do not charge/recharge razor until fully dried.
Do not charge razor in a pouch.
CHARGE
C 1 Connect cord to razor; Plug the charging
plug into any 100V to 240V AC outlet.Use
only the charging plug provided.The green
charging indicator will light up to indicate
razor is (re) charging.
An adaptor plug may be necessary for
charging in some foreign countries. Use an
attachment plug adaptor of the proper
configuration for the power outlet.
Your new razor will automatically convert to work
on 100V to 240V AC systems.
2 First time charging requires 12 hours.
After initial charge, recharging requires
approximately 8 hours. A fully charged
razor has a cordless shaving time of up to
45 minutes.
Recharging
1 First time charging requires 12 hours.
After initial charge, recharging requires
approximately 8 hours.
2 When razor is fully charged,disconnect
the charging plug from outlet.
Do not keep razor permanently plugged into
outlet.