Filter
Top Products
17Philips Lifeline 6900/6800/AT Series User’s Manual
Communicator
Cleaning Your Communicator
Keep the Communicator free of dust by wiping it with a soft
cotton cloth. If additional cleaning is required, follow the steps
below:
1. Turn the POWER switch OFF, and unplug the power cord
from the electrical outlet. Unplug the telephone cord from
the wall jack. Note: You cannot use your Lifeline Service to
call for help while the Communicator is turned off or the
telephone cord is disconnected. Accordingly, you may wish
to have a family member or caregiver present while you are
cleaning your Communicator.
2. Slightly dampen a soft cloth with a mild all-purpose cleaner
and gently wipe surfaces clean. Do not use detergent or
abrasive cleaners on your Communicator.
3. Reconnect the power cord to the electrical outlet, reconnect
the telephone cord to the wall jack, and then turn the
POWER switch back ON.
4. Test your system by pressing your Personal Help Button
and speaking through the Communicator with the Response
Center.
Caution: Do not use spray cleaners directly on your
Communicator. Excessive moisture could get inside the unit and
cause damage.
Communicator Battery
Your Communicator uses a factory-installed battery located in the
battery compartment beneath the unit. This battery will provide
up to 30 hours of backup should you lose power. Lifeline will
notify you if this battery needs to be replaced.