Philips 6756X Electric Shaver User Manual


 
8.
ENGLISH
IMPORTANT
B Only use the power plug and the charging stand provided
to charge the razor.
B The power plug transforms 100-240 AC volts to
12 volts DC.
B An adaptor plug may be necessary for cord usage in
some foreign countries.Your new razor will automatically
convert internally to work on 100V to 240V AC/DC
systems.
LED CHARGING INDICATIONS
B As soon as you start charging the razor, the green
charging indicator light will go on.
B When the batteries have been fully charged, the green
charging indicator light will start blinking.
B The red recharging indicator light will blink when the
batteries are almost empty.
B The red recharging indicator light will blink a few times
after the shaver has been switched off.
CHARGING
B Charging or recharging at temperatures below 40ºF or
higher than 95ºF adversely affects lifetime of batteries.
B Battery Performance is best if you recharge only when
batteries are (almost) completely empty.
B Do not charge razor in pouch.
1 Connect the small plug into the charging stand and put
the power plug into any 100V to 240V AC/DC outlet.
Use only the cord and stand provided.
2 Place the razor in the charging stand.The green
charging indicator light will go on.