Filter
Top Products
14.
ENGLISH
5 Remove one cutter/comb, at a time, out of frame.
6 Cutter should be held with cutters facing up and
brushed in an upward motion. Clean razor comb with
long bristles of brush in a circular motion.
7 For optimum performance, razor cutters and combs
should be cleaned in a degreasing liquid (e.g., Norelco
Razor Cleaner, model RC1776, or alcohol) and
lubricated with Norelco Razor Lubricant, model AL80,
or one drop of mineral oil (in the center of the head).
8 While holding Razor Head Assembly in one hand, gently
place one cutter/comb back into Assembly.
9 Repeat procedure for other two cutting heads.
10 Replace frame back into Razor Head Assembly. While
pressing down, turn wheel clockwise to lock frame
into place.
11 Press Razor Head Assembly back on razor housing.