Filter
Top Products
ENGLISH16
6 Open the Razor Head Assembly and leave
it open to let the Razor air dry completely.
Every Two Months: Razor Heads
IMPORTANT: Do Not mix up the cutters
and combs as the shaving performance may be
adversely affected for several weeks before
optimal shaving performance is restored.
1 Switch razor OFF.
C
2 Press the Razor Head Release Button
located under razor heads on front side of
Razor.
C
3 Remove the Razor Head Assembly and
clean the razor heads and hair chamber by
running under hot water. Be sure water is
not too hot so as to cause burns or
scalding.
C
4 While holding Razor Head Assembly in
one hand, press center wheel down while
turning counterclockwise to release and
lift out frame. Set frame aside.
C
5 Remove and clean one cutter and comb, at
a time.
2
1
1
2
6711X_6701X DFU.rQXD 11/5/03 6:09 PM Page 16 (Black plate)