Filter
Top Products
15
11 Replace the cutter and razor head in the Head Assembly.
12 Repeat the process for the other two razor heads
(cutters and heads).
13 Replace the frame.
14 Press down and turn the wheel clockwise until it locks
into place.
15 Replace the Razor Head Assembly back on razor.
After Each Use:Trimmer
1 Turn razor OFF.
2 Push Trimmer Slide Switch up to pop up Trimmer.
3 Clean Trimmer with the brush after each use.
4 Lubricate the Trimmer teeth with Norelco Razor
Lubricant (model AL80), or with one drop of mineral oil
every 6 months.
5 Close Trimmer by sliding Trimmer switch down.