Philips 3865XL Electric Shaver User Manual


 
8A.ONCE A WEEK
1. Clean Razor Head Assem-
bly as shown (Fig. 4).
2. Lift Razor Head Assembly
using thumb and index
finger to remove from
razor housing (Fig. 5).
3. Clean inside of Razor
Head Assembly and
Hair Chamber with long
bristles of brush.
4. Press Razor Head Assem-
bly back on razor hous-
ing.
IMPORTANT: Do NOT
interchange the cutters and
combs. They are a matched set
and if interchanged may ad-
versely affect shaving perfor-
mance until cutters reseat them-
selves. Therefore, remove, clean,
and replace each set individually.
1. Remove Razor Head
Assembly (Fig. 5).
2. While holding Razor Head
Assembly in one hand,
press center wheel down
while turning counterclock-
wise to release frame and
lift out. Set frame aside
(Fig. 6).
3. Slide one cutter/
comb, at a time, out of
frame as shown (Fig. 7).
4. Cutter should be held as
shown and brushed in an
upward motion (Fig. 8).
Clean inside of comb
with long
bristles of
brush in a circular
motion.
5. For consistently close and
comfortable shaves, razor
heads should be cleaned
and lubricated every 4-8
weeks. Cleaning heads
in a degreasing liquid
(e.g. Norelco Razor
Cleaner, RAZORMATE
Electrosonic Cleaner or
alcohol).
6. Replace cutter into comb
section. Slide cutting head
back into frame making
sure that flat rim of cutting
head slides under 2
clamps on frame.
7. Repeat procedure for
other two cutting heads.
8. Replace frame, with cutting
heads in place, back
into Razor Head
Assembly. While press-
ing down, turn wheel
clockwise to lock frame
into place (Fig. 9).
9. Press Razor Head Assembly
back on razor housing.
10. Spread Norelco Razor
Lubricant, model AL80,
or one drop of mineral
oil over floating heads
with your finger.
9. HQ4 REPLACE-
MENT HEADS
AND RAZOR
ACCESSORIES
Replacement Heads:
The self-sharpening rotary
blades in your Norelco
razor are precision-made to
give closer shaves. When
they finally do need replac-
ing, specify only Norelco
brand replacement cutters
and combs, model HQ4.
DO NOT USE shaver
sharpeners as this will
damage your blades and
lifters and will adversely
affect the shaving perfor-
mance.
NOTE: It is recommended
that you replace your razor
heads once a year.
Razor Cleaners:
Norelco RAZORMATE Electro-
sonic Heads Cleaner, model
ERC100.
Norelco Razor Cleaner,
model RC1776.
Norelco Razor Lubricant,
model AL80.
Norelco Razor Accessories
may be purchased at a
store near you, an
Authorized Norelco Service
Location, or by using the
handy order form enclosed.
10.IMPORTANT
BATTERY
DISPOSAL
INFORMATION
When discarding your razor:
THIS NORELCO RAZOR
CONTAINS NICKEL-CAD-
MIUM RECHARGEABLE
BATTERIES WHICH MUST
BE RECYCLED OR DIS-
POSED OF PROPERLY.
Refer to enclosed instruc-
tion sheet for directions on
removing rechargeable bat-
teries.
CAUTION:
Batteries should be re-
moved by consumer
only
when razor is to
be discarded.
Make sure razor is un-
plugged before disman-
tling for battery
removal.
All servicing or battery
replacement should be per-
formed by an Authorized
Norelco Service Location
only.
5 6 10
7
8
9
8B.ONCE EVERY 4-8 WEEKS
60-Day Money-Back Guarantee
R
To enjoy the closest and most comfortable shave from your new
Norelco Men’s Razor, the razor should be used exclusively
for 3-4
weeks. This allows your hair and skin enough time to adapt to the
Norelco Shaving System. If, after that period of time, you are not
fully satisfied with your Norelco Men’s Razor, send the product back
and we’ll refund you the full purchase price.
The razor must be shipped prepaid by insured mail, insurance
prepaid, and have the sales receipt, indicating purchase price
and the date of purchase, enclosed. The razor must be post-
marked no later than 60 days
after the date of purchase. Norelco
reserves the right to verify the purchase price of the razor and limit
refunds not to exceed suggested retail price.
Send dated sales receipt, your complete name and address as indi-
cated below, and the razor, prepaid to:
Norelco Consumer Products Company
A Division of Philips Electronics North America
Corporation
P.O. Box 1116
Skokie, IL 60076
Please allow 4-6 weeks for delivery of check.
Please Print!
NAME:
ADDRESS:
CITY:
STATE: ZIP:
TELEPHONE NO.: ( )
REASON FOR RETURNING:
Area Code