Filter
Top Products
6. 7.
TRIMMING
To groom sideburns and moustache:
1 Turn razor ON.
2 Push up Trimmer Slide Switch.
3 Hold Trimmer as shown and move in downward strokes
with gentle pressure.
4 Close Trimmer by sliding Trimmer switch down.
5 Turn razor OFF.
CLEANING
Once A Week: Razor
1 Turn razor OFF (disconnect cord from razor and outlet
if using razor corded).
2 Clean the top of the razor with the supplied brush.
3 Remove Razor Head Assembly from the razor unit.
4 Brush the inside of housing and Razor Head Assembly.
5 Replace the Razor Head Assembly back on to razor.
Every Two Months: Razor Heads
1 Turn razor OFF and disconnect from outlet.
2 Remove Razor Head Assembly from housing unit.
3 Brush the inside of the housing.
4 Turn Razor Head Assembly over so that the
underside is exposed.
5 Press down and turn wheel of frame counterclockwise.
6 Remove the frame and brush clean.
7 Slide and remove one cutter and head at a time to clean.
• Be careful not to mix up cutters and heads.They
are a matched set and if interchanged, it will greatly
affect shaving performance.
8 Separate the cutter from the head.