Philips 1160X Electric Shaver User Manual


 
ENGLISH
Note: DO NOT place or clean any parts of the
charging stand/Jet Clean System in a dishwasher.
Storage
The razor can be placed in the charging stand/
Jet Clean System for safe storage. Remove the
plug from outlet as soon as the razor is fully
charged or cleaned.
If appliance will not be used for an extended
period of time, it is recommended that the
cleaning solution in the Jet Clean canister be
emptied out before storing.
Be sure razor is turned off. Remove cord from
outlet and charging stand or Jet Clean System
before storing in a safe, dry location where
it will not be crushed, banged, or subject to
damage.
Do not wrap cord around razor/charging
stand or Jet Clean System when storing.
Store cord in a safe location where it will not
be cut or damaged.
Do not keep charging stand or Jet Clean
System permanently plugged into outlet.
Do not place or store charging stand/Jet
Clean System where it can fall or be pulled
into a tub or sink, water or other liquid while
plugged in.
C If storing razor in the charging stand, put
the Protective Razor Head Cap on razor to
protect heads.
36
ENGLISH
Assistance
For assistance, visit our website:
www.philips.com/support or call
1-800-243-3050.
Information is available 24 hours a day,
7 days a week.
Battery Removal
C
This Philips Norelco razor contains a
rechargeable Lithium-Ion battery
which must be disposed of properly.
Battery should only be removed when
razor is to be discarded.
For assistance, visit our website,
www.philips.com/support or call toll free:
1-800-243-3050.
1 Turn razor ON.
2 Allow razor to run until the battery is
empty/depleted.
3 Turn razor OFF.
4 Use a screwdriver to remove the back
panel of the razor.
5 Remove the rechargeable battery.
6 Do not attempt to replace battery.
Insulate battery ends by covering with tape
and/or place battery in a small plastic bag.
37