Panasonic TH-L32XM6Z Microscope & Magnifier User Manual


 
Using the Menu Functions
13
a
s
.
/
]
[Option Settings]
[Film Cadence Mode]
Improves vertical resolution for movie images [On] /
[Off]
This function is available for the interlaced signal.
[1080p Pixel Direct]
(For 39” & 50” models only)
Reproduces the original image quality in detail for
1080p (HDMI) input signal [On] / [Off]
[HDMI Content Type]
Adjusts the picture settings of each HDMI input
according to the selected content type [Graphics] /
[Photos] / [Auto] / [Off]
[Auto]: Automatically adjusts the picture settings
according to the received HDMI content if the
connected equipment supports HDMI Content Type.
To set the availability of each content type for [Auto]
mode, select [Auto Detail Setting].
For HDMI input.
[HDMI RGB Range]
Adjusts the black level of the image for each HDMI
input [Auto] / [Full] / [Normal]
When the black level is not suitable, select [Full].
For HDMI input.
[3D-COMB]
Makes still or slow motion pictures more vivid [On] /
[Off]
Set to [On] to improve the colours in case patterning
occurs while viewing still or slow motion pictures.
For PAL / NTSC signal reception in TV mode or from
composite.
[Screen Settings]
[16:9 Overscan]
Selects the screen area displaying the image for 16:9
aspect [On] / [Off]
[On]: Enlarges the image to hide its edges. Select
this if noise is generated on the edge of the screen.
[Off]: Displays the image in the original size.
This function can be memorised separately for
SD (Standard definition) and HD (High definition)
signals.
[H-Size]
Switches over horizontal scanning size [H-Size1] /
[H-Size2]
[Zoom Adjustments]
Adjusts the vertical position and size when the aspect
is set to [Just] or [Zoom] mode
[Just]: V-Size max is 3
[Zoom]: V-Size max is 15
[Screen Display]
Turns off / on the TV screen without turning off the TV
[On] / [Off]
The sound is active even if the screen turns off.
Press any buttons (except Standby) to turn the
screen on.
[Copy Adjustment]
Copies picture adjustments to other inputs.
[Option Settings] and [Screen Settings] are not copied.
[Destination Viewing Mode]
Sets the viewing mode for the destination input [True
Cinema] / [Custom]
[Destination Input]
Selects the destination input
[Copy Start]
Select [Yes] to start copying
[Reset Picture Defaults]
Resets the current picture settings to defaults.
Sound
[Mode]
Sets your favourite sound mode [Standard] / [Music] /
[Speech] / [User]
The selected mode affects all input signals.
[Standard]
: Standard sound mode
[Music]
: Improves sound quality for watching music
videos, etc.
[Speech]
: Improves sound quality for watching news,
drama, etc.

In Standard, Music and Speech modes, you can
adjust the [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User]: Adjusts the sounds manually by using the
equaliser
When you select [User] mode, [Equaliser] is active
instead of [Bass] and [Treble]. Select [Equaliser] and
adjust the frequency. (below)
[Bass], [Treble]
Adjusts the bass / treble level respectively
[Equaliser]
Adjusts the frequency level to suit your favourite sound
quality
This function is available when [Mode] is set to [User].
Select the frequency and change the frequency level
by using the cursor buttons.
To enhance the bass sound, raise the level of the lower
frequency. To enhance the treble sound, raise the level
of the higher frequency.
To reset the levels of each frequency to the default
settings, select [Reset Equaliser Settings] by using the
cursor button, and then press the OK button.
[Balance]
Adjusts volume level of right and left speakers
[Surround]
Surround sound settings [On] / [Off]
[Auto Gain Control]
Automatically regulates large sound level differences
between channels and inputs [On] / [Off]
[Volume Correction]
Adjusts the volume of individual channel or input mode
[Speaker Distance to Wall]
Compensates for the low frequency sound due to the
distance between the speakers and the wall
[Up to 30cm] / [Over 30cm]
If the distance between the TV and wall is over 30 cm,
[Over 30cm] is recommended.
If the distance between the TV and wall is within
30 cm, [Up to 30cm] is recommended.
[MPX]
Selects multiplex sound mode (if available)
[Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
For Analogue TV
XM_EM6AZ.indd 13XM_EM6AZ.indd 13 2/1/2013 2:13:59 PM2/1/2013 2:13:59 PM